Showing 1–12 of 13 results
Classic Audio Loudspeakers Hartsfield Hartsfield Full Field Coil Drivers! The Only Hartsfield on the planet using the finest Field Coil Drivers! The magnificent performance of this front-loading corner horn is created by a 15″ low-frequency driver coupled to a long exponential horn. Above 800 cps, a 2″ high-frequency driver coupled through a unique…
Classic Audio Loudspeakers T-5.1 Very Musical Speaker, Very efficient and easy to drive wit low watts Classic Audio Loudspeakers T-5.1 The T-5 with 3-way loudspeaker systems are built with the finest components that consist of Alnico and Cobalt magnets, Carbon filter cones and Beryllium diaphrams with 8 and 16-ohm assemblies, resulting in…
Classic Audio Loudspeakers T-3.4 Field Coils The Only Field Coil Speakers on the Planet using Beryllium Horn The Classic audio Loudspeakers T-3.4 project follows our T-1 loudspeaker without compromising the built quality. It’s designed to obtain the finest possible sound from this relatively small enclosure. Contains the same high-quality components that have made…
Classic Audio Loudspeakers T-1.5 Reference The Only Speaker Using a Field Coil Beryllium Horn Driver on the Planet!!! Classic Audio Loudspeakers T-1.5 Reference The T-1 system was designed to obtain the finest possible sound without compromise. This system utilizes a field coil to energize its components; it is the “perfect” magnet. All permanent magnets…
The Cube Audio Sub 10 were designed to accompany the Nenuphar Mini Monitors, Nenuphar Mini, Magus or even Bliss C loudspeakers. Since we used sealed cabinets for very low group delay and amazing accuracy, the integration of the sub with full-range driver is very easy and effortless. The fullrange driver does not have any crossover so the sound is as pure as was before, just the lowest bass is added if necessary. Complete regulation of SUB volume, phase with an addition of 0 – 6 dB gain in the range of 30-50 Hz make the sub a perfect match for the speakers.
The woofer in the sub is very fast and relatively lightweight. That allows a AB Class 200W Amp to deliver very energetic, superbly controlled bass. The sub amp allows for volume, phase, frequency cut-off, boost regulation so it enables placing the speakers in the best sounding spot in your room and than just adjust the bass parameters to your liking. You will never have trouble with bass again.
The sub is offered as the NENUPHAR MINI BASiS set. It consist of two NENUPHAR MINI MONITORS and two SUB 10 units.
It can be also combined with any of our loudspeakers from classic Nenuphar to Bliss C. One or two units can be used for entire system. That way you can transform your current speakers into the beasts that will give you live concert experience at home.
Parameters:
Cabinet type: Sealed
Amp power: 200W AB Class
Woofer size: 10″
Resonant frequency: 20 Hz
Efficiency: 88 dB @ 1W
Frequency response: 20 Hz – 200Hz ( 3db)*
Dimensions: 40 x 50 x 25 cm
Weight: 20 Kg
* Frequency response may vary and depends on room size and accompanying electronic equipment.
The Cube Audio Sub 12 were designed to accompany the Nenuphar Monitors or classic Nenuphar so sealed cabinets are used for very low group delay and amazing accuracy. The integration of the sub with full-range driver is very easy and effortless. The fullrange driver does not have any crossover so the sound is as pure as was before, just the lowest bass is added if necessary. Complete regulation of SUB volume, phase with an addition of 0 – 6 dB gain in the range of 30-50 Hz make the sub a perfect match for the speakers.
The woofer in the sub is very fast and relatively lightweight. That allows a AB Class 200W Amp to deliver very energetic, superbly controlled bass. The sub amp allows for volume, phase, frequency cut-off, boost regulation so it enables placing the speakers in the best sounding spot in your room and than just adjust the bass parameters to your liking. You will never have trouble with bass again.
The sub is offered as a NENUPHAR BASiS set. It consist of two NENUPHAR MONITORS and two SUB12 units.
It can be also combined with any of our loudspeakers from classic Nenuphar to Bliss C. One or two units can be used for entire system. That way you can transform your current speakers into the beasts that will give you live concert experience at home.
Parameters:
Cabinet type: Sealed
Amp power: 200W AB Class
Woofer size: 12″
Resonant frequency: 19 Hz
Efficiency: 88 dB @1W
Frequency response: 18 Hz – 200Hz ( 3db)*
Dimensions: 30 x 50 x 105 cm
Weight: 23 Kg
* Frequency response may vary and depends on room size and accompanying electronic equipment.
Cube Audio Nenuphar BASiS is a single driver loudspeaker based on Cube Audio F10 Neo driver with an addition of new Cube Audio Sub 12. State of art fullrange drivers combined with a fine-tuned bass-reflex cabinet and very high-quality fast and tight bass from the Sub is an ultimate audio experience. Modern, Elegant design and high-quality black or white piano finish make the loudspeaker a beautiful addition to every style of interior. All fullrange and loudspeakers are handmade in Poland. Pursuing the highest quality and longevity, the manufacturing process involves both artisan craftsmanship and modern precise computer-controlled CNC machines.
The Nenuphar BASiS is dedicated for rooms of 30 – 100 square meters. They are a perfect match for a tube amp with at least 3 Watts per channel. Our personal preference is somewhere around 2A3, Px4, 45 tube-based amps. Nonetheless, most solid-state amps (especially those working in A-class) are also an amazing match for the Nenuphars.
The subs were designed to accompany the Nenuphar Monitors or classic Nenuphar so sealed cabinets were used for very low group delay and amazing accuracy. The fullrange driver does not have any crossover so the sound is as pure as was before, just the lowest bass is added if necessary. Complete regulation of SUB volume, phase with an addition of 0 – 6 dB gain in the range of 30-50 Hz make the sub a perfect match for the speakers.
Fullrange speaker
10″ fullrange driver
Max power: 40 W
Efficiency: 92 dB
Width / height = 260 mm
Depth = 107 mm
Weight = 6 kg
SUB 12
12″ bass driver
Active, Sealed cabinet unit
Amplifier power: 200W AB class
Frequency response: 17 Hz – 18kHz ( 6db)*
Cabinet type: Sealed
Amp power: 200W AB Class
Wooder size: 12″
Resonant frequency: 19 Hz
Efficiency: 88 dB @ 1W
Frequency response: 18 Hz – 200Hz ( 3db)*
Dimensions: 30 x 50 x 105 cm
Weight: 23 Kg
* Frequency response may vary and depends on room size and accompanying electronic equipment.
Aries Cerat Ianus Ithaka DAC The Ithaka Digital-to-Analogue Converter from the Aries Cerat Ianus Series represents a bold step forward in the evolution of high-end digital audio. By combining one of the company’s most advanced digital conversion platforms with its latest TriodeFet analogue output stage technology, the Ithaka redefines what is possible from a digital…
Aries Cerat Kassandra Signature Limited Edition DAC The Kassandra Signature Limited Edition represents the highest level of digital conversion within the Kassandra series from Aries Cerat. Designed as the ultimate statement in digital replay, it pushes the boundaries of what is possible in digital-to-analogue performance. From the earliest stages of Aries Cerat’s development, it was…
Aries Cerat Kassandra Signature DAC The Kassandra Signature DAC represents the ultimate evolution of the Kassandra digital conversion platform from Aries Cerat. Designed as a statement-level digital source, it builds upon the already exceptional Kassandra Reference architecture while pushing performance to even greater heights. From the very beginning of Aries Cerat’s development, it was clear…
Aries Cerat Kassandra Reference DAC The Kassandra Reference DAC represents the pursuit of a truly uncompromised digital source. Designed as part of the flagship Reference Series from Aries Cerat, it was created with a clear goal: to build a digital converter capable of delivering the natural timbre, flow, and musicality of the finest analogue sources…
Trafomatic Rhapsody Integrated Amplifier Trafomagic Rhapsody Class A Integrated Power Amplifier Rhapsody – 300B Single-Ended Integrated Tube Amplifier The Trafomatic Rhapsody represents the pinnacle of tube amplification, combining decades of experience with a dedication to musical authenticity. Designed around the legendary 300B output tubes, this integrated amplifier delivers a pure, rich, and expressive sound that…