Showing 37–48 of 107 results
J.SIKORA REFERENCE LINE TURNTABLE The J.Sikora Reference turntable is an extreme development towards the same goals we set for the Standard turntable. This is a no-compromise turntable that can be considered a true reference in both name and performance. No less than six types of materials and four centrally-controlled DC/PAPST motors are used. The…
Jual Turntables Indonesia High End Audio STANDARD LINE TURNTABLE Our design goals for this outstanding turntable were: maximum rigidity, minimal resonance, minimal vibrations and the highest achievable level of rotational stability. We eventually accomplished this with the use of no less than five different and carefully tuned materials forming a sandwich arrangement. Rotational stability…
J.Sikora Turntable STANDARD MAX LINE TURNTABLE Maximum development of the Standard line turntable 2 tonearm armboards Motor controller built into the plinth (like at the Reference line) J.Sikora Standard Max Line Technical specifications Total weight: 83kg Platter weight: 18kg Platter material: derlin and cast iron Material: aluminium,brass,copper,inox,bronze Bearing type: ceramic ball-inverted Motor: 2…
The Line Magnetic 805iA uses single-ended triode 805 tubes and operate in pure Class A. It delivers 2x48W power. It has 3 unbalanced line inputs, 1 bypass input and 4, 8, 16Ω output groups. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.
The use of high-quality components (Mundorf N-Cap capacitors, ALPS potentiometer) wired in the air, for the most part, is the guarantee of exemplary reliability. Its power and current capacity allow it to manage a very wide range of speakers. The use of the legendary triode 805 offers to listen to an unusual musicality.
HIGHLIGHTS
– Single-ended design
– Class A amplifier
– Point-to-point wiring
– High-quality components
TUBES
Input stage: 1x 6SL7 2x 6SN7
Drivers: 2x 300B
Power stage: 2x 805 « single-ended » Pure Class A
Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
Analog Inputs: 3 line inputs, 1 by-pass input Load impedance: 4/8/16Ω SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.
Metal and removable tube guard cage
Infrared Remote control
Tubes Basics Common Replacements
300B 600B, 300A, 4300B
6SL7 6N9P, 6H9C, CV1985, ECC35
6SN7 6H8C, 6N8P, 5692, CV181, ECC33
805 805, FU-5
Specifications
Class A amplifier – 2x48W RMS
THD: 1% (1kHz)
Signal/Noise ratio: 87dB (Weighted A)
Fréquence Responsive: (-1.5dB) : 10 – 50.000 Hz
Sensitivity: 300 mV (Built-in Mode)
Input Impedance: 100kΩ
Load impedance for HP to connect: 4/8/16Ω
Connectors
3x Line inputs RCA (pair)
1x Pre-in input
2x Screw terminals compatible with banana plugs
Dimensions: W 430 x H 275 x D 415 mm
Weight: 42 Kg
The LM-150IA uses for its power stage 4x KT150 polarized class AB and delivering a power of 2x100W RMS.
Tubes we choose are Shuguang 12AX7, Shuguang 12AU7, Electro Harmonix 6SN7 and Tung-sol KT150. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use the same unit of the amplifier to get the best sound quality out of it.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-150IA as a power amplifier. User bias control has been used for bias adjustment including 2 vu-meters.
Highlights
– High-end design
– Point-to-point wiring
– High-quality components
– High power
TUBES
Input stage: 2x 12AX7
Rectifier: 1x 12AU7
Drivers: 2x 6SN7 (Electro Harmonix)
Power stage: 4x KT150 (Tung-sol)
Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
Analog Inputs: 3 line inputs, 1 by-pass input
Load impedance: 4/8/16Ω
SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.
Metal and removable tube guard cage
Infrared Remote control
Tubes Basics Common Replacements
12AX7 12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751
12AU7 ECC82, 12AU7EH, 5814, 6189, CV4003
6SN7 6NP8, 6H8C, 6H8M, 6F8G, CV181, QB65, ECC32
Specifications
Class AB amplifier
THD: 1% (1kHz)
Signal/Noise ratio: 87dB (Weighted A)
Frequency response (-1.5dB): 10 – 50.000 Hz
Sensitivity: 220 mV (Mode intégré)
Input impedance: 100kΩ
Load impedance for HP to connect: 4/8/16Ω
Connectors
3x Line inputs RCA (pair)
1x Pre-in input
2x Screw terminals compatible with banana plugs
The integrated amplifier LM-210IA is a Single Ended amplifier with 2x 300B tubes in Class A amplification and delivers 2x8W. Output transformers are oversized. Listening the magic of the 300B is total both in the richness of the timbres and the subtlety of the sound scene. The use of high quality components (Realcap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability.
Its transformers output are of EI type, specially designed for power supply. 4 pairs of input and speaker terminals for 4, 8 or 16 ohm speakers are located on the back panel. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.
Important features
-Hand-made construction with the finest point-to-point wiring.
-Bias control is accessible on top of the amplifier panel with true ampere meter.
-Backlight on/off selector: Turns the meter light on or off.
-NFB selector min / max: Adjustment of the feedback level.
-Integrated / Pre-in selector: Switch from built-in preamplifier to external.
-Specially designed EI transformer for power supply.
-Two EI output transformers with wide bandwidth are applied.
-ALPS volume control and Realcap capacitors are applied.
Class amplifier A
Output power 2x8W RMS
Tubes
Input stage 2x 12AX7
Drivers 2x 310A
Rectifier 2x 5U4G
Power stage 2x 300B; Single Ended design, Pure Class A
THD 1% at 1 kHz
S/N >8 dB, Class A
Frequency response 15Hz to 35kHz (-1.5 dB)
Sensitivity 400 mV (Built-in Mode) 1000 mV (Pre-in Mode)
Input Impedance 100kΩ
Load impedance for HP to connect 4/8/16Ω
Connectors 3x Line inputs RCA(paire)
Dimensions W 380 x D 405 x H 345mm
Weight 32 Kg
The Line Magnetic integrated amplifier LM-211IA is a push pull amplifier with 4x EL34 tubes in Class AB amplification and delivers 2x15W in triode mode and 2x32W in ultra-linear mode. It has 4 balanced line inputs and 4/8Ω output groups.
The rear-illuminated front panel meter is used to adjust polarization of the tubes. The use of high quality components (Realcap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability. Its transformers output are of EI type, specially designed for power supply. The LM-211IA delivers dynamic, rich and natural sound.
Highlights
– Push-pull
– Class AB amplifier
– Point-to-point wiring
– High quality components
TUBES
Input stage: 2x 12AX7 et 2x 12AU7
Power stage: 4x EL34
Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
Analog Inputs: 4 line inputs
Load impedance: 4/8Ω
SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.
Metal and removable tube guard cage
Infrared Remote control
Specifications
Class AB amplifier
2x15W RMS Triode 2x32W RMS Ultra-linear
Tubes: 2x 12AX7, 2x 12AU7, 4x EL34
THD: 1% (1kHz)
Signal/Noise ratio: 88dB (Weighted A)
Frequency response: 10 à 50.000 Hz (-1.5 dB)
Sensitivity: 200 mV (Built-in Mode)
Input Impedance: 100kΩ
Load impedance for HP to connect: 4/8Ω
Dimensions: W 376 x H 192 x D 345 mm
Weight: 19.6 Kg
The LM-212PA mono power amplifier is Line Magnetic’s flagship, using a massive 212 tube in a single ended design and complete with an ingenious lifting/retracting function that protects the tube for accidental damage when not in use.
The input stage tube is a 310A, specially manufactured for and by Line Magnetic. Rectification is performed by a 274B and a 300B works as the driver tube.
Nothing but top grade components are used in the LM-212PA mono power amplifier, such as American RTX Multicap capacitors, Danish Jensen capacitors, German Mundorf MCap capacitors, NCC capacitors, Nichicon capacitors, Kiwame capacitors, a Motorola high current rectifier bridge and Panasonic relays.
Bias for the 212 tube is easily adjusted using the top mounted ampere meter. The 300B driver bias is controlled by an auto-bias circuit and does not need to be adjusted.
Some Highlights
– Single-ended design
– Class A amplifier
– Point-to-point wiring
– High quality components
Tubes used in this amplifier
Input stage: 1x 310A
Driver: 1x 300B
Rectifier: 1x 274B
Power stage: 1x 212
Features
Hand-made construction with the finest point-to-point wiring
SoftStart and time-delay circuit – 30 seconds
Specially designed EI transformers for power supply and output
212 tube protection mechanism
Tubes supplied Common replacements
300B 300A, 4300B
310A Soviet Union/om12C, WE310A
274B 5R4GY, 5X4G
212 ML-212E
Specifications
Class A amplifier – 1x32W
THD: 1% (1kHz)
Signal/Noise ratio: 87dB
Frequency response: 15-35,000 Hz (-1.5 dB)
Sensitivity: 1000 mV
Input Impedance: 100KΩ (RCA), 600Ω (XLR)
Load impedance: 4/8/16Ω
Connectors
2x Line input RCA
1x Line input XLR
1x Screw terminals compatible with banana plugs
Dimensions: W 300 x H 600 x D 575 mm
Weight: 60 Kg
Finish: Silver
The Line Magnetic integrated amplifier LM-216IA is a push-pull amplifier with 4x KT88 tubes in Class AB amplification and delivers 2x22W in triode mode and 2x38W in ultra-linear mode. It has 4 balanced line inputs and 4/8Ω output groups. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.
The use of high quality components (Realcap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability. Its transformers output are of EI type, specially designed for power supply. The LM-216iA delivers dynamic, rich and natural sound.
Highlights
– Triode/ultra-linear modes
– Point-to-point wiring
– High quality components
TUBES
Input stage: 2x 12AX7 et 2x 12BH7
Power stage: 4x KT88
Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
Analog Inputs: 4 line inputs
Load impedance: 4/8Ω
SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied
Metal and removable tube guard cage
Infrared Remote control
Specifications
Class AB amplifier
2x22W RMS Triode and 2x38W RMS Ultra-linear
Tubes: 2x 12AX7, 2x 12BH7, 4x KT88
THD: 1% (1kHz)
Signal/Noise ratio: 87dB (Weighted A)
Frequency response: 10 à 50.000 Hz (-1.5 dB)
Sensitivity: 220 mV (Built-in Mode)
Input Impedance: 100kΩ
Load impedance for HP to connect: 4/8Ω
Connectors
4x Line Inputs RCA (pair)
2x Screw terminals compatible with banana plugs
Dimensions: W 376 x H 192 x D 345 mm
Weight: 19.6 Kg
The Line Magnetic 217IA integrated amplifier operates in Class A with tubes 300B mounted in “Single-ended” and delivers a power of 2x8W. It has 3 unbalanced line inputs, a CD input and groups of 4 and 8Ω outputs. The backlit level meter on the front is used to adjust the polarization of the tubes. The use of high quality components (Realcap capacitors, potentiometer ALPS) wired in the air for the most part is the guarantee of exemplary reliability. Its output transformers are EI type designed especially for it allow to manage a very wide range of speakers. The LM-217IA delivers sound that is dynamic, rich and natural. Voice soft modes and Pure and smooth are suitable for vocals and softer music based of ropes.
Features:
1.Hand-made construction with the finest point-to-point wiring.
2.Specially designed EI transformer for power supply.
3.Two EI output transformers with wide bandwidth are applied.
4.Two 12AX7s and 12AU7s are used in the preamp stage.
5.300B tubes are used for A single ended class a power amplifier.
6.Provide the triode and superlinear selection function. Triode, voice soft, pure and smooth, suitable for appreciation vocals, string and other types of music;
7.Triode and Ultralinear selection.
8.SoftStart and time-delay circuit. (30 seconds)
9.ALPS volume control and Realcap capacitors are applied.
10.Remote control for all functions.
11.User bias control is accessible on top of the amplifiers panel with true ampere meter.
12.Convenient installation drawing plug-in valve cap
Specifications:
Power output：8W+8W（RMS Triode operation）
Frequency response：10Hz～50kHz（-1.5dB）
THD：1%（1kHz）
S/N Ratio：87dB
Input Sensitivity：180mV
Input Impedance：100kΩ
Output Impedance：4Ω ，8Ω
Tube Complement：12AX7 x2、12AU7 x2、300B x2、5U4G x1、5AR4 x1
Power supply: AC 220V 50/60Hz ±10%
Power Consumption：90W
Working Condition: Temperature: 0℃～40℃ Moisture: 20%～80%
Storage Condition: Temperature: -20℃～70℃ Moisture: 20%～90%
Dimension： W 376 x H 192 x D 345mm
Net weight: 22kg
An upgraded version of line magnetic LM-219. Tubes have been upgraded, upgraded circuit optimization, & upgraded transformer optimization.
Product features:
Pure Class A , Single Ended design . Twenty four watts per channel .
All tube integrated with 12AX7 input tubes , 310A and 300B double stage driver tubes and 845 output tubes.
4 pairs of input connectors , Speaker terminals for 4 , 8 , 16 Ohm are provided.
Two user bias controls and bias meters are located on the front panel , allowing you to monitor and adjust bias with ease.
One output meter with two needles is located on the middle of the frontplate , to allow you to monitor the power output of each channel.
Two pieces of specially designed EI transformers for the power supply and two EI transformers with wide bandwidth are used in the design.
A Japanese ALPS audio grade volume potentiometer is used.
Standard with remote control.
Hand made construction with the finest point-to-point wiring.
Soft start and time delay circuit ( 30 secondes ).
Specification:
－Power output：24W+24W（Single-ended Class A）
－Frequency response：15Hz～35kHz（-1.5dB）
－THD：1%（1kHz）
－S/N Ratio：87dB
－Input Sensitivity：230mV(Integrated) 1000mV (Pre-IN)
－Input Impedance：100kΩ
－Output Impedance：4Ω、8Ω、16Ω
－Power Requirements： ～220V±5%（50Hz）
－Dimension (WxDxH)： （ 430 x 430 x 400 ）mm
－Tube Complement：12AX7 x2、310A x2、300B x2、845 x2
－Net Weight：55kg
－Power Consumption：400W
－Working conditions: temperature: 0 ℃ to 40 ℃ Moisture: 20% ~ 80%
－Storage conditions: temperature: – 20 ℃ ~ 70 ℃ Moisture: 20% ~ 90%
Line Magnetic’s LM-222 Iconic speaker is a high-efficiency horn speaker. This efficiency of 102dB allows it to be driven by almost any amplifier, specifically suiting lower powered tube amplifiers to produce a natural, warm sound.
Following the concept of the famous Jensen H-222 speaker, Line Magnetic has designed the LM-222 with a 12-inch coaxial driver. This driver is a two way horn coaxial speaker with a high sensitivity. High frequency response is very good and detail obtained from the speaker is extraordinary.
Specifications
Frequency response: 37Hz~20KHz
Input sensitivity: 102dB
Power: 30W
Impedance: 8Ω
Dimensions : W 450 x H 750 x D 645 mm
Weight: 28.5kg