Shop

  • Line Magnetic LM-88IA

    Line Magnetic LM-88IA

    Integrated Tube Amplifier
    Push Pull KT88 – 2X42W

    Forty-two watts per channel, Class AB Integrated Stereo Amplifier with KT88 (JJ Electronic) output power tubes, 6CL8A (Mullard) and 12BH7 (Electro Harmonix) input tubes.

    LM-88IA Amplifier can operate in two different ways Auto-biased or Fixed bias. You can select the one you prefer. Power output for Auto-bias mode is 45 watts while for fixed bias it is 30 watts per channel.

    Specially designed Toroid transformers made of Z11 Core fort power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.

     

    Highlights
    – Point-to-point wiring
    – Triode/ultra-linear modes
    – High quality components

    TUBES
    Input stage: 2x 6CL8A (Mullard) et 2x 12BH7 (Electro Harmonix)
    Power stage: 4x KT88 (JJ)

    Specifications
    Class A amplifier
    THD: 1% (1kHz)
    Signal/Noise ratio: 87dB (Weighted A)
    Frequency response: 10 à 50.000 Hz (-1.5 db)
    Sensitivity: 180 mV (fixe), 250 mV (auto), 1000 mV (pré-in)
    Input Impedance: 100kΩ
    Load impedance for HP to connect: 4/8/16Ω

    Specially designed EI transformer for power supply
    Two EI output transformers with wide bandwidth are applied
    ALPS volume control and Realcap capacitors are applied.
    Analog inputs: 3 RCA line inputs (pair)
    SoftStart and time-delay circuit. (30 seconds)

    Connectors
    3x Line input RCA (pair)
    1x Pre-In input
    2x Screw terminals compatible with banana plugs

    Dimensions : W 430 x H 220 x D 365 mm
    Weight: 19,6 Kg

  • Line Magnetic LM-mini84iA Headphone Amplifier

    Line Magnetic LM-mini84iA Headphone Amplifier

    LM-mini84iA

    Headphone Amplifier

    The LM-mini84iA is a compact integrated amplifier specifically built to match with headphones. EL84 tubes are used in a single ended design to deliver 3 watts per channel.

    The LM-mini84iA can be inserted into any existing system between a source and amplifier to provide a fantastic sounding headphone signal. For example, it could be used between a DAC and integrated amplifier, passing the signal through to the main amplifier and speakers when not in use.

    This amplifier can also be used to directly power high efficiency speakers, with a selector located on the front panel to choose between speaker or headphone output.

    Some Highlights
    – Compact single ended design
    – Class A amplifier
    – Point-to-point wiring
    – High quality components

    Tubes used in this amplifier
    Input stage: 2x 12AX7
    Power stage: 2x EL84

    Features
    Hand-made construction with the finest point-to-point wiring
    SoftStart and time-delay circuit – 30 seconds
    EI power supply and output transformers with wide bandwidth
    ALPS volume control and Realcap capacitors
    Metal and removable tube guard cage
    Infrared Remote control

    Tubes supplied Common replacements
    12AX7 12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751
    EL84 6P14, 6P14P, 6BQ5, N709

    Specifications
    Class A amplifier – 2x3W RMS
    THD: 1% (1kHz)
    Signal/Noise ratio: 87dB (Weighted A)
    Frequency response (-1.5dB): 10 – 50,000 Hz
    Sensitivity: 210 mV
    Input Impedance: 100kΩ
    Load impedance: 4/8Ω

    Connectors
    1x Line input RCA (pair)
    1x Headphone output Jack 3.5mm
    2x Screw terminals compatible with banana plugs

    Dimensions: W 175 x H 123 x D 190 mm
    Weight: 4.5 Kg
    Finish: Black

  • Line Magnetic LP-33 Phono Stage

    Line Magnetic LP-33 Phono Stage

    LP-33 Phono Stage

    The Line Magnetic LP-33 is a high quality phono stage that will suit most MM or MC cartridges. The design has separated the power supply from the output stage of the phono preamplifier to avoid and lower the disturbance between each other.

    High quality components such as German Mcap coupling capacitors and Japanese Nichicon & Rubycon filtering capacitors have been used to provide the best possible from the circuit design. Three ECC803S tubes are used for final amplification of the signal.

    Features
    – Separate power supply and output stage
    – Tube rectified power supply
    – Output level control
    – High quality components

    Tubes used in this Phono Stage
    Output Stage: 3 x ECC803S
    Rectification: 1 x 6Z4

    Tubes supplied Common replacements
    ECC803S ECC83, 12AX7

    Specifications
    Frequency response: 20Hz~20KHz (+/-1.5dB)
    THD: 0.15% (1kHz)
    SNR MC: 60dB
    SNR MM: 70dB
    Input Sensitivity MC: 1mV(H), 0.5mV(L)
    Input Sensitivity MM: 6mV
    Gain MC: 66dB(H), 72dB(L)
    Gain MM: 50dB
    Input Impedance MC: 100Ω(H), 47Ω(L)
    Input Impedance MM: 50kΩ
    Output Impedance: 10kΩ

    Connectors
    2 x Input RCA (pair)
    1x Output RCA (pair)

    Dimensions Power Supply: W 170mm x H 113mm x D 81mm
    Dimensions Output Stage: W 302mm x H 131mm x D 139mm
    Weight: 6.5 Kg
    Finish: Silver

  • Playback Design Dream Amplifier

    Playback Design Dream Amplifier

    Playback Design Dream Amplifier

    SPA-8 Playback Designs Stereo Power Amplifier

    FEATURES

    • ultra-low-noise differential linear-phase input
    • discrete complementary differential class-A input stage
    • discrete complementary class-A voltage amplifier stage
    • class-A pre-driver and driver
    • class-AB bipolar output stage
    • low impedance CFP bias generator
    • latest thermal TRAK technology for ultra-fast and precise bias
    • 20x 200W BJ transistors per channel
    • 2x 1800VA toroidal transformer with electric and magnetic shielding
    • 294000µF capacitors
    • each channel is a standalone processor supervised system (total of four processors)

    SPECS

    • 2x 1600W continuous peak into 4 Ohm
    • 0.00054% THD+N (1kHz, 400W, 8R)
    • 98dB SNR (1W, 8R, 20Hz-22kHz)
    • 860x730x340 (LxBxH[mm])
    • 130kg
  • Playback Design Dream DAC

    Playback Design Dream DAC

    Dream DAC

    MPD-8 Playback Designs Digital Analog Converter

    DAC WITH INTEGRATED VOLUME CONTROL

    • Up to 384kHz PCM and up to 11.2MHz DSD
    • USB I/O, AES, Coax, TosLink, PLink I/O
    • Balanced and unbalanced analog outputs
    • digitally driven, analog volume control
    • double Differential discrete DAC
    • double Differential ultra high end analog stages per channel
    • three regulated analog power supplies with three transformers
    • Software upgradeable by end user
    • Recording software for file creation on computer
    • Easy and intuitive remote control via iPad or Android

     

    MPD-8 DREAM DAC
    This product has been designed for ultra high end performance. Its architecture is specifically
    designed to eliminate and isolate anything that might hurt its analog performance. For instance,
    left and right output channels are built on separate circuit boards with completely separated
    power supplies. All digital input signals are filtered, cleaned and processed with Playback
    Designs’ proprietary algorithms to keep any negative influences away from the hyper sensitive
    DAC. Special care has been given to the design of the clock generator to make sure it is not
    exposed to any potentially harmful influences from external sources.

    The MPD-8 is the companion DAC product for the MPT-8 transport which is designed to further
    isolate the MPD-8 DAC from the influences of digital sources by connecting to the DAC via a
    proprietary fiber optical link with galvanic separation (PLINK). As we all know too well, digital
    sources bring various degrees of “pollution” in form of correlated clock jitter, asynchronous
    clocks (disk drives, CPU, displays etc) and many other negative effects. When these sources
    are connected directly to the DAC, there is always the chance for some of this “pollution”
    reaching the analog circuitry of the DAC. However, with the MPT-8 receiving and processing
    all digital sources and then sending a cleaned up digital stream to the MPD-8 via a completely
    galvanically isolated link, our proprietary fiber optical cable (PLINK), the MPD-8 is left alone
    performing what it is designed for: converting digital signals to super high end analog.

     

     

    However, the MPD-8 is also equipped with a series of common digital inputs so that it can
    serve as a stand-alone DAC with any other digital source as well. These inputs are automatically
    switched off internally if not selected to prevent any negative effect of asynchronous data
    streams from reaching the DAC.
    Digital inputs: USB (PCM up to 384kHz, DSD up to 11.2MHz)
    AES (PCM up to 192kHz, DSD via DoP)
    Coax (PCM up to 192kHz, DSD via DoP)
    TosLink (PCM up to 96kHz)
    PLINK optical (PCM up to 384kHz, DSD up to 11.2MHz)
    PLINK optical (reserved for direct connection of MPT-8 transport)
    Analog outputs: Balanced on XLR connectors
    Unbalanced on RCA connectors
    Both analog outputs can be set to fixed values of -6db, -3db, 0db,
    +3db, +6db and variable for full analog volume control.
    DAC architecture: Discrete with Playback Designs’ own proprietary digital algorithms and
    dual differential analog output stage. Each analog output stage (for
    each channel) is completely separated on its own printed circuit board
    with its own independent linear power supply for maximum performance.
    Volume control: An ultra high end analog volume control can be activated for each
    channel.
    Software-update: Playback Designs already created an excellent reputation with its
    program to offer free software upgrades with new features or new
    algorithms that the end user can upload into the DAC without the need
    to return it to the dealer or manufacturer. This will keep the product
    always up-to-date with the latest trends and, therefore, will help in
    keeping the value high for this product.
    Remote control: A hand-held IR control set is provided in a sleek case with lit buttons.
    The MPD-8 is also equipped with a network interface for remote
    control via networked apps (future expansion).

  • Playback Design Dream Player MPS-8(1)Playback Design Dream Player MPS-8(2)

    Playback Design Dream Player

    Playback Design Dream Player

    MPS-8 Playback Designs Player

    INTEGRATED PLAYER, MUSIC STREAMER

    FEATURES

    • Up to 384kHz PCM and up to 11.2MHz DSD
    • USB I/O, AES, Coax, TosLink, PLink I/O
    • digitally driven, analog volume control
    • differential discrete DAC
    • differential high end analog stages per channel
    • two regulated analog power supplies with two transformers
    • Special designed high end SACD/CD transport
    • optional built-in StreamX Streamer
    • Easy and intuitive remote control via iPad or Android
  • Playback Design Dream Transport

    Playback Design Dream Transport

    Dream Transport

    MPT-8 Playback Designs Transport

    INTEGRATED TRANSPORT, MUSIC SERVER, MUSIC STREAMER

    • Connects directly to MPD-8 (or any other Playback Designs DAC) via PLink
    • Connects to any other DAC via AES
    • Special designed high end SACD/CD transport
    • optional built-in Syrah server with 2TB SSD storage
    • optional built-in StreamX Streamer
    • Easy and intuitive remote control via iPad or Android

     

     

    The MPT-8 serves as the digital source for its companion product, the MPD-8 Dream DAC. It
    is designed to provide a multitude of internal digital sources as well as plenty of connectivity for
    many external sources. It incorporates extensive buffering, re-clocking, filtering and cleaning
    of all digital sources before encoding the digital audio data in its native format onto a fiber
    optical carrier (PLINK) for the MPD-8 DAC. This architecture provides the ultimate separation
    between digital sources and the sensitive analog circuitry inside the DAC. In fact, PLINK not
    only provides a galvanic separation, but also allows for extremely long cable lengths (up to
    300m).

     

    The MPT-8 comes standard with a very high-quality CD/SACD drive system that has been
    developed by D&M specifically for audiophile applications and is not just a modified mass-produced video drive as is very common with most other drive systems. All vital parts of this
    drive are built-in metal for increased stability, tracking accuracy and vibration control.
    In addition, the MPT-8 can be customized with the following internal options. They don’t
    necessarily have to be installed at the factory, but can also be added as after-sales options by
    the dealer.
    • Syrah music server: this adds the same exact functionality as Playback Designs’ very
    successful Syrah music server that is very easy to control via a custom app on a tablet. It
    also supports fully automatic ripping of CD’s and connection of external storage such as
    USB disk drives and network storage (NAS). Standard configuration is with an internal 2TB
    solid-state-disc (SSD).
    • Roon Core Server: this option allows direct integration of the entire Dream system into any
    Roon audio network and makes it “roon-ready” with full support for any PCM or DSD rate.
    But it is also a full Roon server that can be controlled via Roon’s control app (iOS and
    Android). With its own network connection you can add an unlimited amount of files to your
    Roon music library.
    • Stream-X streamer provides direct connection to streaming services such as Tidal, Qobuz,
    Deezer and vTuner that can be controlled via an app on a tablet. Furthermore, it also
    allows to play files from connected USB storage or network storage (NAS) and provides
    “roon-ready” integration into Roon audio networks with PCM support up to 192kHz and
    single rate DSD. It functions as DLNA and UPnP renderer as well.

    The MPT-8 is powered by the same high quality linear power supply as used in the MPD-8
    DAC.
    Digital inputs: USB (PCM up to 384kHz, DSD up to 11.2MHz)
    AES (PCM up to 192kHz, DSD via DoP)
    Coax (PCM up to 192kHz, DSD via DoP)
    TosLink (PCM up to 96kHz)
    PLINK optical (PCM up to 384kHz, DSD up to 11.2MHz)
    Digital outputs: PLINK optical (reserved for direct connection to MPD-8 Dream DAC)
    AES (PCM up to 192kHz, DSD via DoP)
    Internal options: Syrah music server
    Roon Core music server
    Stream-X streamer
    Software update: Playback Designs already created an excellent reputation with its
    program to offer free software upgrades with new features or new
    algorithms that the end user can upload into the transport without the
    need to return it to the dealer or manufacturer. This will keep the
    product always up-to-date with the latest trends and, therefore, will
    help in keeping the value high for this product.
    Remote control: A hand-held IR control set is provided in a sleek case with lit buttons.
    The MPT-8 is also equipped with a network interface for remote control
    via networked apps (future expansion).

  • Purist Audio Design 25th Anniversary

    Purist Audio Design 25th Anniversary

    25th Anniversary Speaker Cables

    Purist Audio Design is continually working on cable designs to immerse the audiophile in the joy and passion of music. The result is the 25th Anniversary Cable Line. Jim and our engineers spent countless man-hours designing the core conductors for this line of cables, including enhancing the Ferox shielding, code-named Ferox x103. The speaker cables utilize a combination of silver-stranded and solid-core copper single crystal in a four cable configuration. The expertly engineered 25th Anniversary cable line includes interconnects, speaker cables, and power cords. It has the ability to reveal the inner beauty of music! Help us celebrate 25 years of music through the science of sound by sitting back, relaxing, and listening.

    Cable Specifications
    Conductors SCS/SCC
    Metals Ag/Cu
    Dielectric Material F.E.P/P.E.
    Gauge (effective) 8 AWG
    Dampening Material Ferox
    Current Capacity (DC) 73
    Resistance 0.000628Ω/FT
    Estimated Break-In Time 300 Hours
    Cable Diameter (Speaker) 5/8 Inch
    Cable Diameter (Bi-Wire) 7/8 Inch
    Connector Type Spade/Banana or Custom
    Material Treatment Triple (3x) Cryomag©

  • Purist Audio Design Aqueous Aureas

    Purist Audio Design Aqueous Aureas

    Aqueous Aureas Speaker Cable

    The audiophile aims for the highest quality and best sound possible. We offer the Aqueous Aureas line in two different configurations, with customization available upon request:
    • Standard Speaker
    • Bi-Wire Speaker
    These speaker cables come in a two (2) cable set.

    The Aqueous Aureus Speaker Cables come standard with:

    • Purist’s newly designed spade or banana.

    Cable Specifications
    Conductors Alloy
    Metals Ag/Cu
    Dielectric Material F.E.P.
    Gauge (effective) 10 AWG
    Dampening Material Contego
    Current Capacity (DC) 55
    Resistance 0.000999Ω/FT
    Estimated Break-In Time 250 Hours
    Cable Diameter (Speaker) 3/4 Inch
    Cable Diameter (Bi-Wire) 7/8 Inch
    Connector Type Spade/Banana or Custom
    Material Treatment Triple (3x) Cryomag©

  • Purist Audio Design Corvus

    Purist Audio Design Corvus

    Corvus Speaker Cables

    The audiophile aims for the highest quality and best sound possible. We offer the Corvus line in two different configurations, with customization available upon request:
    • Standard Speaker
    • Bi-Wire Speaker
    These speaker cables come in a two (2) cable set.

    The Corvus Speaker Cables come standard with:

    • Purist’s newly designed interchangeable spade/banana.

    Cable Specifications
    Conductors SCC
    Metals Cu
    Dielectric Material P.V.C.
    Gauge (effective) 10 AWG
    Dampening Material Ferox
    Current Capacity (DC) 55
    Resistance 0.000999Ω/FT
    Estimated Break-In Time 300 Hours
    Cable Diameter (Speaker) 3/4 Inch
    Cable Diameter (Bi-Wire) 7/8 Inch
    Connector Type Spade/Banana or Custom
    Material Treatment Triple (3x) Cryomag©

  • Purist Audio Design Dominus

    Purist Audio Design Dominus

    Dominus Speaker Cables

    The audiophile aims for the highest quality and best sound possible. We offer the Dominus line in two different configurations, with customization available upon request:
    • Standard Speaker
    • Bi-Wire Speaker

    These speaker cables come in a four (4) cable set, with an individual positive cable and individual negative cable for each channel.

    The Dominus Speaker Cables come standard with:

    • Purist’s newly designed interchangeable spade/banana.

    Cable Specifications
    Conductors Alloy
    Metals Ag/Cu/Au
    Dielectric Material F.E.P/P.E.
    Gauge (effective) 7 AWG
    Dampening Material Ferox
    Current Capacity (DC) 82
    Resistance 0.000498Ω/FT
    Estimated Break-In Time 300 Hours
    Cable Diameter (Speaker) 5/8 Inch
    Cable Diameter (Bi-Wire) 7/8 Inch
    Connector Type Spade/Banana or Custom
    Material Treatment Triple (3x) Cryomag©

  • Purist Audio Design Genesis

    Purist Audio Design Genesis

    Genesis Speaker Cable

    The audiophile aims for the highest quality and best sound possible. We offer the Genesis line in two different configurations, with customization available upon request:
    • Standard Speaker
    • Bi-Wire Speaker
    These speaker cables come in a two (2) cable set.

    The Genesis Speaker Cables come standard with:

    • Purist’s newly designed spade or banana!

    Cable Specifications
    Conductors PCCC
    Metals Cu
    Dielectric Material P.P.
    Gauge (effective) 10 AWG
    Dampening Material N/A
    Current Capacity (DC) 55
    Resistance 0.000999Ω/FT
    Estimated Break-In Time 200 Hours
    Cable Diameter (Speaker) 3/4 Inch
    Cable Diameter (Bi-Wire) 7/8 Inch
    Connector Type Spade/Banana or Custom
    Material Treatment Triple (3x) Cryomag©