Shop

  • Cube Audio Sub 12

    Cube Audio Sub 12

    SUB 12

    The Cube Audio Sub 12 were designed to accompany the Nenuphar Monitors or classic Nenuphar so sealed cabinets are used for very low group delay and amazing accuracy. The integration of the sub with full-range driver is very easy and effortless. The fullrange driver does not have any crossover so the sound is as pure as was before, just the lowest bass is added if necessary. Complete regulation of SUB volume, phase with an addition of 0 – 6 dB gain in the range of 30-50 Hz make the sub a perfect match for the speakers.

    The woofer in the sub is very fast and relatively lightweight. That allows a AB Class 200W Amp to deliver very energetic, superbly controlled bass. The sub amp allows for volume, phase, frequency cut-off, boost regulation so it enables placing the speakers in the best sounding spot in your room and than just adjust the bass parameters to your liking. You will never have trouble with bass again.

    The sub is offered as a NENUPHAR BASiS set. It consist of two NENUPHAR MONITORS and two SUB12 units.

    ​It can be also combined with any of our loudspeakers from classic Nenuphar to Bliss C. One or two units can be used for entire system. That way you can transform your current speakers into the beasts that will give you live concert experience at home.

    Parameters:
    Cabinet type: Sealed
    Amp power: 200W AB Class
    Woofer size: 12″
    Resonant frequency: 19 Hz
    Efficiency: 88 dB @1W
    Frequency response: 18 Hz – 200Hz ( 3db)*
    Dimensions: 30 x 50 x 105 cm
    Weight: 23 Kg ​

    * Frequency response may vary and depends on room size and accompanying electronic equipment.

  • DSPeaker Anti-Mode 2.0 Dual Core

    DSPeaker Anti-Mode 2.0 Dual Core

    Anti-Mode 2.0 Dual Core

    Speaker-room interaction is typically the most important performance-limiting factor of any high-end audio system. Every listening space introduces errors that can be in the magnitude of dozen decibels or even more. These errors are most pronounced at the bass and lower midrange regions, where the classic acoustic treatment loses its effectiveness.

    Anti-Mode 2.0 Dual Core is DSPeaker’s award-winning loudspeaker optimization system capable of perfecting the acoustic performance of any full-range stereo audio system. It is based on our new Anti-Mode 2.0 algorithm which refines the popular Anti-Mode algorithm even further.

    Features include:

    • New, improved Anti-Mode 2.0 automatic room correction algorithm
    • Can be used as a locally clocked high quality jitter-free DAC
    • Supports USB audio as well as S/PDIF input/output via optical toslink
    • Dual balanced ADCs to deliver the highest level of audio performance that meets the expectations of the most demanding audiophiles
    • Dual (one per channel) balanced DACs with jitter free operation (local crystal), oversampling to 6144 kHz, DSP buffering and filtering
    • Can be used as a high quality pre-amp with remote controlled volume
    • Analog resistor network volume controller to ensure full digital precision
    • Extensive sound customization options, including quick house curve design tool, linear-phase full spectrum tilt, several parametric EQs etc
    • Supports several sound profiles (e.g. independent ”sweet spots” and/or equalizer settings), quickly switchable with the remote controller
    • Friendly graphical user interface, very easy to set-up and operate
    • Ability to measure and display room responses on a built-in 262k-color display
    • ”Pure digital” mode using S/PDIF input & output: signal is processed in the digital domain all the way (S/PDIF output resolution is independent from input)
    • Digital signals are re-aligned for jitter-free operation
    • Versatile connectivity: insert Anti-Mode 2.0 Dual Core between your existing pre-amp and power amplifier or powered speakers or utilize the processor loop or record monitor loop (you need the record monitor function, just record out and record in are not enough) of your integrated amplifier – or use it as a standalone DAC / preamp!
    • Anti-Mode 2.0 Dual Core can be connected to almost every audio system. Please see the connection example page for more information.

    Connections
    2 x RCA inputs
    2 x XLR inputs
    2 x RCA outputs
    2 x XLR outputs
    Toslink S/PDIF digital input
    Toslink S/PDIF digital output
    USB
    Datalink
    Microphone jack
    12VDC power connector

    Technical Specifications

    Digital Specifications
    DSP Cores:
    1 x VS1000 (GUI&USB)
    2 x VS8053 IceDragon (Audio)

    Processing:
    40-bit, 2-channels

    DSP Filters:
    Anti-Mode 2.0 Multi-Rate (FIR & IIR)
    House Curve filter
    Linear-Phase Tilt
    Parametric EQs
    Adjustable Infrasonic
    Adjustable cross-over
    Analog specifications (2013 revision)
    Dynamic Range: > 108dB
    Volume Control Steps: 0.5dB
    Input Sensitivity XLR: 3.9/7.9 Vrms, RCA: 2.5/5.0 Vrms
    Output Voltage Unbalanced RCA: 7.2 V(RMS) max
    Output Voltage Balanced XLR: 14.4 V(RMS) max
    ADC: 6.144 MHz oversampling dual per channel
    DAC: 6.144 MHz oversampling dual per channel, local clocking, buffering

    Dimensions
    236 x 55 x 146 mm (9¼ x 2 x 5½ “)

  • DSPeaker Anti-Mode 8033 Automatic Subwoofer Equalizer

    DSPeaker Anti-Mode 8033 Automatic Subwoofer Equalizer

    Anti-Mode 8033 Automatic Subwoofer Equalizer

    A typical listening room resonates in low frequencies. Because of this, even the best subwoofer may not sound good enough. Much of the audio content get masked by the resonances, introducing unwanted characteristics (such as “slowness” and “boominess”) to the sound. This problem is most pronounced when subwoofer is placed close to walls or corners of the room.

    The Golden Ear awarded Anti-Mode™ technology eliminates the resonances of the speaker and the room by equalizing both amplitude and time domain responses using very accurate digital signal processing filter structures and anti-phasing technology. This way, the listener can hear frequencies down to the cut-off frequency of the subwoofer. Transient response is also drastically improved in the process, making bass sound faster and more controlled.

    Anti-Mode™ 8033 is very simple to use. The calibration process is completely automatic: it generates frequency sweeps to the desired calibration point (or multiple points) and measures the combined transfer function of the subwoofer-room system.

    Anti-Mode™ 8033 uses regular RCA connectors, which can be found from vast majority of home theater equipment. Input to the device is taken from the line level subwoofer output of the (pre-)amplifier. Output is connected to the line level input of the subwoofer.

    Features
    • Measures and corrects the combined frequency response of your subwoofer system and the listening room
    • User-friendly automatic calibration procedure
    • Can be used with any active subwoofer
    • Minimum phase filtering, no significant algorithm delay
    • Correction range 16-144 Hz
    • Three user-selectable additional equalization filters
    • Single or multiple measurement point calibration
    • Measurement microphone is included
    • Ultra-compact enclosure: 126 mm x 80 mm x 28 mm (5″ x 3.2″ x 1.1″)
    • Low power consumption: 1.5 W
    • RoHS directive compliant

    Technical Specifications
    Electrical characteristics:
    Power consumption: 1.2 W
    Input sensitivity: Line level (1.0 Vrms nominal, 1.75 Vrms max)
    Amplification: 3.0 dB (bypass)
    Operation voltage: 9 VAC or 12 VDC
    Low-pass (analog): Bessel 12 dB / octave, Q ~ 0.5, fc = 250 Hz

    8033 cinema
    Frequency range (-3 dB): 5 – 160 Hz
    Dynamic ratio: > 90 dB

    8033S-II
    Frequency range (-3 dB): 5 – 250 Hz
    Dynamic ratio: > 92dB

    Firmware features:
    Frequency resolution: < 0.5 Hz
    Maximum attenuation: 96 dB
    Filter Q-value range: Unlimited (32-bit integer space)
    Sub-sonic filter: 10 Hz (user-selectable)
    Computation accuracy: 32 / 40-bit integer
    Latency: 2.7 ms

    8033 cinema
    Anti-Mode-Filters: 28
    Correction range: 16 – 160 Hz
    Lift filters: 20Hz, 30Hz
    Lowpass filters: – 7 selectable modes

    8033S-II
    Anti-Mode-Filters: 36
    Correction range: 16 – 250Hz
    Lift filters: 20Hz, 25Hz, 30Hz
    Lowpass filters: 7 selectable modes

  • DSPeaker Anti-Mode X4

    DSPeaker Anti-Mode X4

    Anti-Mode X4

    The new DSPeaker Anti-Mode X4TM preamplifier/DAC combines an uncompromising selection of audio electronics with more than a decade of expertise in acoustics and signal processing. It was designed with one purpose in mind: to elevate to a new high what is possible in stereo sound reproduction in the domestic environment.

    Three high-end stereo digital-to-analog converters (DACs) are driving the primary, auxiliary, and headphone outputs. Combined with output range control and picking the best converters using an IC tester, the XLR outputs reach 126dB dynamic range and less than 0.0008% total harmonic distortion. Both primary and auxiliary outputs are active simultaneously for speakers and subs, available in both XLR and RCA. The signal of the primary output is also provided as optical and coaxial SPDIF.

    Input connections are plentiful. The two stereo RCA and one stereo XLR analog inputs provide SNR+THD of -104dB. Whatever audio source you connect, the input range control selection allows you to gain full performance. Total of six SPDIF inputs and the USB Audio 2.0 input support up to 192kHz and DSD64 / DSD128 (on USB).

    Technical Specifications

    DSP Cores
    1 x VS1205 (GUI & Firmware update USB)
    6 x VS1205 (Audio Inputs, processing)
    3 x High-Quality DAC (pre-selected), 3 x High-Quality ADC

    Firmware Highlights
    • Anti-Mode 3.0 room calibration algorithm
    • Automatic cross-over frequency optimization (US Pat. 9,955,261)
    • Extensive tone controls and user-defined parametric equalizers
    • Anti-Mode 3.0 Multi-Rate (FIR & IIR)
    • House Curve, Linear-Phase Tilt, Parametric EQs
    • Adjustable Infrasonic
    • Adjustable cross-over

    Interfaces
    2x stereo RCA, 1x stereo XLR input
    3x optical and 3x coaxial inputs (up to stereo 192kHz with coaxial)
    USB Audio 2.0 input (192kHz PCM, DSD64 and DSD128 by DSD over PCM)
    Primary Output: stereo RCA, stereo XLR, Optical Toslink, and Coaxial S/PDIF
    Auxiliary Output: stereo RCA and stereo XLR
    Microphone input, Headphone output
    Control wheel with a button, IR Remote

    Analog specifications (typical)
    Primary XLR: Dynamic Range: 126 dB, Total Harmonic Distortion: < 0.0008%
    Analog Input, XLR, SNR+THD: -104dB
    Frequency Response: 20…20000Hz ±0.08dB
    Input Voltage max RCA: 2.5 / 4.4 / 6.2 Vrms, XLR: 2.6 / 5.2 / 12.4 Vrms
    Output Voltage max RCA: 3.2 / 6.4 Vrms, XLR: 6.4 / 14.0 Vrms
    Power consumption: 25W, stand-by: < 0.5W

    Mechanical
    Unit dimensions: 436mm x 70mm x 295mm
    Unit weight: 4.5kg
    Color options: Black or Silver front plate

  • Glanz MH-124S Premium

    Glanz MH-124S Premium – Tonearm

    Glanz MH-124S Premium – Tonearm The “Jewel in the Crown” – the “premium” highest-grade model, acknowledged as delivering the most trusted performance   Glanz MH-124S Features: In pursuit of the ultimate tonearm for further enhanced performance, we have introduced features that take you beyond the S model, as follows: Approximately 30 parts are coated in…

  • GLANZ MH-94S, MH-104S, MH-124S- Tonearms

    GLANZ MH-94S, MH-104S, MH-124S- Tonearms

    GLANZ MH-94S, MH-104S, MH-124S- Tonearms Various Glanz Tonearm Sizes available The ultimate Glanz MH tonearm that demonstrates the true value of analogue audio Glanz MH Tonearm Features: Cartridges can be plugged in, which allows various cartridges to be utilised. To eliminate reverberating sound, we do not use springs. (Springs create an echo). We have blocked…

  • Hana MH Cartriges

    Hana MH Cartriges

    Hana MH Cartriges   One of the world’s best High Output Moving Coil cartridges, the MH combines the technological advances of the Hana M Series with the optimal interface for moving magnet phono stages. M Series Nude Microline stylus – Higher Specification Part Befitting its name, the M Series uses a Nude Microline stylus, mimicking…

  • Hana ML Cartriges

    Hana ML Cartriges

    Hana ML Cartriges   Building upon the foundation of the critically acclaimed HANA sound, the ML aspires toward affordable perfection and represent the further evolution of the “Brilliant and Gorgeous” quality that has earned HANA its worldwide reputation. M Series Nude Microline stylus – Higher Specification Part Befitting its name, the M Series uses a…

  • Hana Umami Red Cartridge

    Hana Umami Red Cartridge – Excel Sound

    Hana Umami Red Cartridge   The HANA-Umami Red Way   The HANA-Umami Red high-end moving coil cartridge combines brilliant materials and classic Japanese techniques with modern audio engineering. Ebony wood, rare-earth magnets, precision-cut diamond, high-purity copper wires, Urushi lacquering, and CNC machined Duralumin synergize under the vision of Hana designer Okada-san. The synergistic relationship in…

  • J.Sikora Initial Line Turntable High End Audio IndonesiaJ.Sikora Turntables

    J.Sikora Initial Line Turntable

    J.Sikora Turntables   J.Sikora INITIAL LINE TURNTABLE For some time it has been our wish to help a wider range of audio enthusiasts reach the experience that our premium products deliver at a lower price point. Our newest model in the range, the Initial, eventually emerged from this desire. We reduced the number of materials…

  • J.Sikora Analog TurntablesJ.Sikora Turntables

    J.Sikora Initial Max Line Turntable

    J.Sikora Turntables   INITIAL MAX LINE TURNTABLE Maximum development of the Initial line turntable 2 motors and 2 tonearm arm boards Clamp, Glass Mat, HQ Power Supply and extra plinth are all included! J.Sikora Turntables   Technical specifications Total weight: 51kg Platter weight: 4kg Platter material: derlin Material: aluminium, inox, cast iron Bearing type: ceramic…

  • J.Sikora KV12 TonearmJ.Sikora KV12 Tonearm

    J.Sikora KV12 Tonearm

    J.SIKORA KV12 TONEARM   The J.Sikora KV12 tonearm is a unique design with a first-ever made aramid fibres tube! J.SIKORA KV12 Technical specifications Bearing type: unipivot Material: aramid fibres, aluminium, bronze, cast iron, stainless steel Oil damping: yes Tube: conical (aramid fibres) VTA adjustment: yes Azimuth: yes Mass: 890g (+armboard 140g) VTA mass: 225g Effective…