Shop

  • Line Magnetic LM-24CD - CD PLAYER & DAC

    Line Magnetic LM-24CD – CD PLAYER & DAC

    LM-24CD – CD PLAYER –

    DAC ESS9016 – POWER STAGE 2X 6ZK8

     

    The LM-24CD has optical and coaxial digital outputs, XLR and BNC analog outputs as well as an analog stereo RCA and XLR outputs as well as an analog stereo RCA and XLR output. The mechanical CD is original SONY KSM-213C.

    The DAC is based on an ESS9016 chip and the output stages use two 6ZK8.

    The USB port on the rear of the LM-24CD allows you to listen to music from your computer. The USB port XMOS operate asynchronously with files 32bits/192kHz.


    Highlights
    Power stage
    DAC ESS9016
    Many analog and digital outputs
    High-quality components

    Specifications
    Frequency response: 20 – 20.000 Hz (+/-3dB)
    Signal/Noise ratio: 110dB
    THD: 0.0025%
    Dynamic: 110B
    Output Level RCA: 2 Vrms
    Output Level XLR: 3 Vrms
    Reading time: 5 secondes

    Connectors
    1x Analog output RCA
    1x Analog output XLR
    1x Digital output AES/EBU
    1x Digital output coaxial
    1x Digital output Optique
    1x Digital output BNC
    1x Input USB 2.0 Type-B

    Included Accessories
    2x Fuses
    1x Remote control
    1x Detachable power cord
    1x Manual


    Generality
    Dimensions (L x H x P): 330 x 105 x 325 mm
    Weight: 10 Kg

    Finish: Black

    Read moreDone
  • Line Magnetic LM-3 Loudspeaker - Alnico version

    Line Magnetic LM-3 Loudspeaker – Alnico version

    LM-3 Loudspeaker

    Alnico version

     

    Line Magnetic’s flagship horn speaker, the LM-3 follows the design concept of the classic Western Electric Horn system.

    Line Magnetic Audio is a brand of High end products founded in 2005. Now it has become well known with its series reproduction of music and regarded as a forerunner in presenting innovative products with cutting edge technology and lasting intrinsic value. Tube electronics, CD players, Classic horns, Classis field coil speakers, DACs, a lot of different series of products we are working on not only Classis electronics but also new technology on dacs and CD players. The LM-3 are exceptional speakers. The pavillon and its medium driver are replicas of the famous Western Electric 22A and the Western Electric 555W. A reproduction at the antipodes of the hi-fi with an extremely natural sound of great magnitude. The bandwith extends from 150Hz to 13kHz. In the bass, an 18-inch speaker, the TA-7376 founded in a low-reflex load. Finally the treble is entrusted to the LM-302, replica of inspiration Jensen.

    The result is amazing : An input sensitivity of 105 dB for an impedance of 8 Ohms.

    The LM-3 Alnico version combines the following drivers:
    Tweeter:                               LM-302
    Mid-Range:                        22A Horn with 555 (Alnico Version)
    Woofer:                              BA-18 (Alnico Version)
    Crossover:                          TA-7376

    Specifications:
    Frequency response:         38Hz~20KHz
    Input sensitivity:                 105dB
    Power:                                100W
    Impedance:                        16Ω

    The PR-22 Three Way Field Coil Power Supply is an adjustable tube rectifier low voltage field coil power supply, specifically designed for low voltage, high current application of field coil drivers. It uses a low voltage tube as the tube rectifier for the power supply.

    The main circuit concept of the PR22 follows the Western Electric WE4144 design. Output voltage is from DC 7V to 24V. It can also be used as a power supply for WE, RCA etc drivers.In order to monitor the current during adjustment there is a meter installed on the front so that you can monitor during adjustment.

    PR-22 Specifications:
    Input Voltage Range:       220V～240V/AC 50Hz～60Hz, 100V～120V/AC 50Hz～60Hz
    Output Voltage Range Three Steps:
    LOW:                                 DC 10-24V / 0.5~2A
    MID:                                  DC 3-10V / 0.5~2A
    HIGH:                                DC 3-10V / 0.5~2A.
    Weight:                             39Kg
    Tubes:                                4 x EL-6C

    Dimensions
    LM-3 Dimension:             900 x 2080 x 690 mm
    PR-22 Dimension:            485 x 320 x 450 mm

    Read moreDone
  • Line Magnetic LM-3 Loudspeaker - Field Coil Version

    Line Magnetic LM-3 Loudspeaker – Field Coil Version

    LM-3 Loudspeaker

    Field Coil Version

     

    Line Magnetic’s flagship horn speaker, the LM-3 follows the design concept of the classic Western Electric Horn system.

    Line Magnetic Audio is a brand of High end products founded in 2005. Now it has become well known with its series reproduction of music and regarded as a forerunner in presenting innovative products with cutting edge technology and lasting intrinsic value. Tube electronics, CD players, Classic horns, Classis field coil speakers, DACs, a lot of different series of products we are working on not only Classis electronics but also new technology on dacs and CD players. The LM-3 are exceptional speakers. The pavillon and its medium driver are replicas of the famous Western Electric 22A and the Western Electric 555W. A reproduction at the antipodes of the hi-fi with an extremely natural sound of great magnitude. The bandwith extends from 150Hz to 13kHz. In the bass, an 18-inch speaker, the TA-7376 founded in a low-reflex load. Finally the treble is entrusted to the LM-302, replica of inspiration Jensen.

    The result is amazing : An input sensitivity of 105 dB for an impedance of 8 Ohms.

    The LM-3 Field Coil version combines the following drivers:
    Tweeter:                             HT-70CU (Horn version)
    Mid-Range:                       22A Horn and 555 (Field Coil Version)
    Woofer:                             TA-4181 (Field coil Version)
    Crossover:                         TA-7376
    Power Supply:                   PR-22

    Specifications:
    Frequency response:         38Hz~20KHz
    Input sensitivity:                 105dB
    Power:                                100W
    Impedance:                        16Ω

    The PR-22 Three Way Field Coil Power Supply is an adjustable tube rectifier low voltage field coil power supply, specifically designed for low voltage, high current application of field coil drivers. It uses a low voltage tube as the tube rectifier for the power supply.

    The main circuit concept of the PR22 follows the Western Electric WE4144 design. Output voltage is from DC 7V to 24V. It can also be used as a power supply for WE, RCA etc drivers.In order to monitor the current during adjustment there is a meter installed on the front so that you can monitor during adjustment.

    PR-22 Specifications:
    Input Voltage Range:       220V～240V/AC 50Hz～60Hz, 100V～120V/AC 50Hz～60Hz
    Output Voltage Range Three Steps:
    LOW:                                 DC 10-24V / 0.5~2A
    MID:                                  DC 3-10V / 0.5~2A
    HIGH:                                DC 3-10V / 0.5~2A.
    Weight:                             39Kg
    Tubes:                                4 x EL-6C

    Dimensions
    LM-3 Dimension:             900 x 2080 x 690 mm
    PR-22 Dimension:            485 x 320 x 450 mm

    Read moreDone
  • Line Magnetic LM-32DAC

    Line Magnetic LM-32DAC

    LM-32DAC

    Digital to Analogue Converter

    The LM-32DAC digital to analogue converter offers the flexibility to select either tube or solid state output on the fly, allowing you to enjoy the output that best matches your system or music selection.

    This DAC takes Xmos USB audio technology which utilises high speed USB 2.0 receiving and decoding 32bit/192kHz high resolution digital signals and is designed with top grade ESS 9028Pro DAC chips.

    It is an asynchronous design with awesome performance from its low distortion, ultra-low-jitter clock recovery technology and features five digital inputs: AES/EBU, BNC, USB, optical and coaxial that will lock onto any signal input at 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz, 352.8KHz, 384KHz, DSD64, DSD128 and DSD256, displaying the input frequency used on the front LCD panel.

    The LM-32DAC features separate high quality power supplies for the Analogue and Digital sections, a toroid power transformer for Digital and a EI power transformer for Analogue. It also has separate rectification, using high speed circuitry for the Digital section and a 6Z4 tube for the Analogue section.

    Finally, the LM-32DAC incorporates Line Magnetic Audio’s world class leading Tube analogue output stage, utilising two 12AU7’s in the buffer for a true tube output.

    Features
    – Separate power supplies for analogue and digital sections
    – Selection of tube or solid state output on the fly
    – Multiple inputs with wide range of input frequencies accepted
    – High quality components

    Tubes used in this DAC
    Tube Buffer: 2 x 12AU7
    Rectification: 1 x 6Z4

    Tubes supplied Common replacements
    12AU7 ECC82, ECC802S

    Specifications
    Sampling Rates: 32bit 44.1KHz 48KHz 88.2KHz 96KHz 176.4KHz 192KHz 352.8KHz 384KHz DSD64 DSD128 DSD256
    Tube Output Impedance: 2KΩ
    Solid State Output Impedance: 600Ω
    Tube Output Level: 3V (+/-0.5dB)
    Solid State Output Level: 2.5V (+/-0.5dB)
    Tube THD: 0.5%
    Solid State THD: 0.02%
    Digital Input Impedance: 75Ω
    Frequency response: 15Hz~50KHz (+/-1dB)
    Dynamic Range: 120dB (A Weighted)
    Tube S/N Ratio: 92dB
    Solid State S/N Ratio: 98dB

    Connectors
    5 x digital inputs: AES/EBU, BNC, USB, Optical and Coaxial
    1x Output RCA (pair)
    1x Output XLR (pair)

    Dimensions: W 430mm x H 325mm x D 105mm
    Weight: 6.7 Kg
    Finish: Black

    Read moreDone
  • Line Magnetic LM-34IA

    Line Magnetic LM-34IA

    Integrated Tube Amplifier
    Push Pull EL34 – CLASS AB – 2X40W

     

    Forty watts per channel, Class AB Integrated Stereo Amplifier with EL34 output power tubes, 12AX7 and 12AU7 input tubes.

    Standard with EL34 output tubes. Want to enjoy some other types of power tubes? That is why we have tube selector here.

    Different from other inputs Pre-In offers you a possibility to connect to some other pre-amplifier so that you can the LM-34IA as a power amplifier.

    Specially designed EI transformers for power supply and two EI output transformers with wide bandwidth are applied. Hand made construction with the finest point-to-point wiring and special audiophiles components has been carefully selected by our designers.

    User bias control has been used for bias adjustment and one meter has been added to the top plate to allow you to monitor bias with ease.

    Highlights
    – Class AB amplifier
    – Point-to-point wiring
    – High quality components

    TUBES
    Input stage: 1x 12AX7 – 2x 12AU7
    Power stage: 4x EL34

    Bias control is accessible on top of the amplifier panel with true ampere meter.
    SoftStart and time-delay circuit. (30 seconds)
    Specially designed EI transformer for power supply
    Two EI output transformers with wide bandwidth are applied
    ALPS volume control and Realcap capacitors are applied.

    Metal and removable tube guard cage
    Infrared Remote control

    Specifications
    Class AB amplifier – 2x40W RMS
    THD: 1% (1kHz)
    Signal/Noise ratio: 88dB (Weighted A)
    Frequency response (-1.5dB): 10 – 50.000 Hz
    Sensitivity: 300 mV
    Input Impedance: 100kΩ
    Load impedance for HP to connect: 4/8Ω

    Connectors
    3x Line inputs RCA (pair)
    1x Pre-in input
    2x Screw terminals compatible with banana plugs

     

    Dimensions: W 377 x H 345 x D 190 mm
    Weight: 20 Kg

    Read moreDone
  • Line Magnetic LM-503PA

    Line Magnetic LM-503PA

    DUAL Mono-block Audio Power Amplifier

    The LM-503PA mono blocs has been created from an original design of Western Electric. It uses a single ended 845 output stage with Full Music 300B drivers. Pre-amplifier stage use a special Line Magnetic tube, the 310A.

    The rectifier tube is a 5U3C and the power line is filtered by two special chokes. User bias controls for 300B and 845 are used for bias adjustment with a specific vu meter to allow you to monitor bias with ease.

    Features:

    Point to point hand soldering circuit, the whole machine adopts single copper soldering.
    Using high-grade special craft and high quality wide range of EI type single-ended output transformer.
    Use 1 high-power Toroidal power transformer per channel.
    Preamp stage using the company design and development of 310A vacuum tubes, promote use 300B level.
    Power stage using one 845 vacuum tubes do class A single-ended power amplifier.
    Power tube current tuning knob and current display meter.
    The input has sound balance transformer input and RCA input selection.
    High voltage delay when turn on.
    Set up big negative feedback loop and small loop negative feedback, to adapt to the different requirements of listening.
    Convenient installation drawing plug-in valve cage cover.
    Voice is soft, pure and smooth, suitable for appreciation of various types of music.

    Specification:
    Power output: 24W +24W(Single-ended class a working condition)
    THD: 1%(1kHZ)
    Frequency response: 15 hz ~ 35 kHZ (1.5 dB)
    S/N Ratio: 87db
    Input Impedance: 100kΩ
    Output Impedance: 4 Ω, 8 Ω, 16 Ω
    Input Sensitivity: 1000 mV
    Vacuum Tube: (310A x 1, 300B x 1, 845 x 1, 5U3C x 1) * 2
    Power supply: AC 220V (+-5%) (50Hz)
    Power Consumption: 290w
    Working conditions: temperature: 0 ℃ to 40 ℃ Moisture: 20% ~ 80%
    Storage conditions: temperature: – 20 ℃ ~ 70 ℃ Moisture: 20% ~ 90%

    TUBES
    Input stage: 1x 310A
    Rectifier: 1x 5U3C
    Drivers: 1x 300B
    Power stage: 1x 845 “Single-ended” and Class A amplifier

    Bias control is accessible on top of the amplifier panel with true ampere meter.
    Selector NFB min/max
    Analog inputs: 1x XLR et 1 RCA
    Load impedance for HP to connect: 4/8/16ΩS
    SoftStart and time-delay circuit. (30 seconds)
    Two EI output transformers with wide bandwidth are applied

    Metal and removable tube guard cage

    Dimension: W 287 x D 574 x H 279) mm x 2
    Net Weight: 32kg x 2 = 64kg
    Gross Weight: 34kg x 2 = 68kg

    Read moreDone
  • Line Magnetic LM-512CA

    Line Magnetic LM-512CA

    Audio Preamplifier Vacuum Tube

     

    The LM-512CA is Line Magnetic’s flagship preamplifier. This preamplifier uses two 6KZ8 tubes for voltage amplification, two 6922 tubes for the driver stage and American RCA 22DE4 tubes for high voltage rectification. A large volume potentiometer sits in the center of the front panel allowing independent adjustment of each of the two channels. It has a balanced XLR, 3 RCA inputs and also RCA and XLR outputs. The Balance phase selection allows to choose the selection between American phase and British phase input Mode.

    The use of high quality components (Multicap, BC Axial, Philips, Panasonic Relay) wired in the air for the most part is the guarantee of exemplary reliability. Its transformers output are of EI type, specially designed for power supply. A selector on the rear of the preamplifier allows the user to select the phase of the XLR input, allowing connection of almost any source. Nothing but top grade components are used in the LM-512CA preamplifier, such as American RTX Multicap capacitors, Danish Jensen capacitors, German Mundorf MCap capacitors, NCC capacitors, Nichicon capacitors, Kiwame capacitors, a Motorola high current rectifier bridge and Panasonic relays.

    Highlights
    – Point-to-point wiring
    – High quality components

    TUBES
    2x 6KZ8 (Mullard)
    2x 6922 (Genalex)
    2x 22DE4 (American RCA)

    Hand-made construction with the finest point-to-point wiring
    Bias control is accessible on top of the amplifier panel with true ampere meter.
    SoftStart and time-relay circuit (30 seconds)
    High quality components: Multicap, BC Axial, Philips, Panasonic Relay
    HOT selector

    Specifications
    THD: 0,5% (1KHz)
    Signal/Noise ratio: 90dB
    Frenquency response: 15 à 30 KHz (-3dB)
    Frequency response RCA: 17 à 10 KHz (-3dB)
    Sensitivity line input RCA: 150mV
    Input Impedance: 600kΩ

    Connectors
    3x Line inputs RCA (pair)
    1x Input XLR (pair)
    1x Output RCA (pair)
    1x Output XLR (pair)

    Tubes Basics Common Replacements
    6KZ8 N.C.
    6922 ECC88, E88CC, 5814, CV2492
    22DE4 N.C.

    Generality
    Dimensions (L x H x P): 430 x 196 x 383 mm
    Weight: 20 Kg

    Read moreDone
  • Line Magnetic LM-513PA

    Line Magnetic LM-513PA

    Dual Mono-Block Power Amplifier Pair

    === DISCONTINUED ===

    The mono amplifier LM-513PA is a Push Pull amplifier with 4x 845 tubes in pure Class A amplification and delivers 1x160W. The use of high-quality components (Multicap, Philips BC filter, Motorola…) hand-made with the finest point-to-point wiring the most part is the guarantee of exemplary reliability.

    Two pieces of Toroid power transformers with high power output are used for better power control and allocation.

    Specification:
    Power output: 160W (MAX)
    THD: 1% (1kHZ)
    Frequency response: 15 hz ~ 35 kHZ (-1.5 dB)
    S/N Ratio: 87 db
    Input Impedance: 100 k Ω (RCA) 600 (Balance)
    Output impedance: 4 Ω, 8 Ω, 16 Ω
    Input Sensitivity: 1000 mV
    Tube:12AX7x1、310Ax1、300B x1、845 x 4
    Power Consumption: 600 w

    Dimensions & Weight
    PRODUCT                              W 447 x H 347 x D 497 mm / 74 Kg
    PACKAGING                             W 610 x H 490 x D 580 mm / 80 Kg
    Net weight: 80kgx2 = 160KG

    Power supply voltage: ～220V±5%（50Hz）
    Working conditions: temperature: 0 ℃ to 40 ℃ Moisture: 20% ~ 80%
    Storage conditions: temperature: – 20 ℃ ~ 70 ℃ Moisture: 20% ~ 90%

    Read moreDone
  • Line Magnetic LM-69 Full Range Speaker

    Line Magnetic LM-69 Full Range Speaker

    LM-69 Full Range Speaker

     

    Line Magnetic’s LM-69 speaker is a 6 x 9 inch full range speaker. The LM-69 takes on both advantages of a 6 inch driver for good mid-high frequency range and a 9 inch driver for low frequency capability.

     

    Also, the LM-69 oval driver reduces resonance oscillation and allows more sound diffusion to create a wide sound stage. This is design is intended to be a very good speaker for listening to vocals.

     

    Specifications

    Frequency response:             40Hz~22KHz
    Input sensitivity:                      95dB
    Power:                                    20W
    Impedance:                            8Ω

    Dimensions (cm):                   W 270mm x H 1060mm+50mm (feet pin) x D 250mm x2pcs
    Net weight:                            20kg x 2 = 40kg
    Gross weight:                         50kg

    Read moreDone
  • Line Magnetic LM-812 Iconic Loudspeaker

    Line Magnetic LM-812 Iconic Loudspeaker

    LM-812

    Iconic Loudspeaker

    Line Magnetic’s LM-812 Iconic speaker is a high-efficiency horn speaker. This efficiency of 102dB allows it to be driven by almost any amplifier, specifically suiting lower powered tube amplifiers to produce a natural, warm sound. The bass speaker with a diameter of 46cm makes it possible to reporduce the low frequencies of an exceptional transparency.

    Inspired by the timeless Altec Iconic 812 speaker system, the Line Magnetic LM-812 Iconic combines an Altec 808-8 driver/horn with Line Magnetic’s own 18 inch Woofer.

    Specifications
    Frequency response:          37Hz~20KHz
    Input sensitivity:                  102dB
    Power:                                 40W
    Impedance:                         8Ω

    Dimensions:                         W 720 x H 1180 x D 590 mm

    Read moreDone
  • Line Magnetic Audio Indonesia

    Line Magnetic LM-845 Premium Version

    LM-845 PREMIUM

    VACUUM TUBE INTEGRATED AMPLIFIER

    SINGLE ENDED 845 – 2X30W

     

    The LM-845 Premium is the result of many years of research on the 845 triodes Single-ended design. Thanks to its exceptional design and manufacturing quality, it is fast becoming the absolute reference in the high-end amplifiers world.

    With a power output of 2x30W, it can be used with most of the existing reference speakers.

    The LM-845 Premium is a combination of two units: One is the amplifier unit and the other is an output unit.
    The LM-845 Premium uses Shuguang 300B tubes in drivers, the 310A for amplifier and Shuguang 12AX7 in pre-amplification.

    There are two user bias controls for 300B and 845 have been used for bias adjustment and two meters have been added to the front plate to allow you to monitor bias with ease. Negative feedback switch is on the front plate that you can choose between two levels of NFB to enjoy the different sound outputs.

    The LM-845 Premium uses 8 transformers (power supply, filtering, coupling and output)!

    Highlights
    – Single-ended design
    – Class A amplifier
    – Point-to-point wiring
    – High-quality components

    TUBES
    Input stage: 2x 12AX7
    Drivers: 2x 300B, 2x 310A
    Power stage: 2x 845 « single-ended »

    Hand-made construction with the finest point-to-point wiring
    Bias control is accessible on top of the amplifier panel with true ampere meter.
    soft start and time-delay circuit. (30 seconds)
    Specially designed EI transformer for power supply
    Two Premium versions EI output transformers with wide bandwidth are applied
    ALPS volume control and Realcap capacitors are applied.

    Metal and removable tube guard cage
    Infrared Remote control

    Tubes basics               Common replacements
    12AX7                           12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751
    300B                              300A, 4300B
    845                                845 A/B/C
    310A                              Soviet Union/om12C, WE310A

     

    Specifications
    Class A amplifier – 2x30W RMS
    THD: 1% (1kHz)
    Signal/Noise ratio: 87dB (Pondéré A)
    Frequency Response  (-1.5dB): 10 – 50.000 Hz
    Sensitivity: 220 mV (Built-in Mode)
    Input Impedance: 100kΩ
    Load impedance for HP to connect: 4/8/16Ω

    Connectors
    3x Line inputs RCA (pair)
    1x Pré-in input
    2x Screw terminals compatible with banana plugs

    Dimensions:
    Amplifier unit: W 435 x H 460 x D 456 mm
    Output unit: W 435 x H 160 x D 456 mm

    Total dimensions: W 435 x H 620 x D 456 mm
    Total Weight: 62 Kg

    Finish: Black

    Read moreDone
  • Line Magnetic LM-845IA

    Line Magnetic LM-845IA

    INTEGRATED TUBE AMPLIFIER
    SINGLE ENDED 845 – 2X22W

    The LM-845IA is a quality upgrade of the old LM-518 amplifier. It delivers twenty-two watts per channel. Single ended design, Pure Class A, Integrated Stereo Amplifier with 845 output power tubes. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.

    The use of high quality components (Realcap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability. Its transformers output are of EI type, specially designed for power supply.

    Its power and current capacity allows it to manage a very wide range of speakers. The use of the legendary triode 845 offers a listening to an unusual musicality.

    Highlights
    – Single ended design
    – Class A amplifier
    – Point-to-point wiring
    – High quality components

    TUBES
    Input stage: 2x 12AX7
    Rectifier: 1x 5AR4
    Drivers: 2x 6P3P
    Power stage: 2x 845 « single-ended » design and pure class A

    Hand-made construction with the finest point-to-point wiring
    Bias control is accessible on top of the amplifier panel with true ampere meter.
    Analog Inputs: 3 line inputs Load impedance: 4/8/16Ω
    SoftStart and time-delay circuit. (30 seconds)
    Specially designed EI transformer for power supply
    Two EI output transformers with wide bandwidth are applied
    ALPS volume control and Realcap capacitors are applied.

    Metal and removable tube guard cage Infrared
    Remote control

     

    Tubes Basics Common Remplacements
    12AX7 12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751
    12AU7 ECC82, 12AU7EH, 5814, 6189, CV4003
    EL34 6CA7

    Specifications
    Class A amplifier – 2x22W RMS
    THD: 1% (1kHz)
    Signal/Noise ratio: 87dB (Weighted A)
    Frequency response (-1.5dB): 10 – 50.000 Hz
    Sensitivity: 220 mV (Built-in Mode)
    Input Impedance: 100kΩ
    Load impedance for HP to connect: 4/8/16Ω

    Connectors
    3x Line inputs RCA (pair)
    1x Pre-in input
    2x Screw terminals compatible with banana plugs

    Included Accessories
    2x Fuses
    1x Remote control
    2x Battery AAA
    1x Detachable power cord
    1x Manual
    1x Warranty Card

    Dimensions: W 365 x H 250 x D 340 mm
    Weight: 35 Kg

    Read moreDone