Shop

  • Purist Audio Design Musaeus

    Purist Audio Design Musaeus

    Musaeus Speaker Cables

    The audiophile aims for the highest quality and best sound possible. We offer the Musaeus line in two different configurations, with customization available upon request:
    • Standard Speaker
    • Bi-Wire Speaker
    These speaker cables come in a two (2) cable set.

    The Musaeus Speaker Cables come standard with:

    • Purist’s newly designed spade or banana.

    Cable Specifications
    Conductors PCCC
    Metals Cu
    Dielectric Material F.E.P.
    Gauge (effective) 10 AWG
    Dampening Material Ferox
    Current Capacity (DC) 55
    Resistance 0.000999Ω/FT
    Estimated Break-In Time 250 Hours
    Cable Diameter (Speaker) 3/4 Inch
    Cable Diameter (Bi-Wire) 7/8 Inch
    Connector Type Spade/Banana or Custom
    Material Treatment Triple (3x) Cryomag©

    Read moreDone
  • Purist Audio Design Neptune

    Purist Audio Design Neptune

    Neptune Speaker Cable

    Purist Audio Design’s newest addition to our Luminist Revision is the Neptune Cable line. It is the pinnacle of our Fluid shielded cables! The speaker cables are crafted around fine single crystal copper strands in a 7 AWG bundle. In order to keep the speaker cables flexible, the positive and negative signals in a channel are separated (like what’s done for the Dominus and 25th Anniversary speaker cables) making it a four (4) cable set. Neptune cables deliver a larger soundstage over the Venustas cables with stunning detail in the mid-range!

    Cable Specifications
    Conductors SCC
    Metals Cu
    Dielectric Material P.E.
    Gauge (effective) 7 AWG
    Dampening Material Fluid
    Current Capacity (DC) 74
    Resistance 0.000999Ω/FT
    Estimated Break-In Time 300 Hours
    Cable Diameter (Speaker) 3/4 Inch
    Cable Diameter (Bi-Wire) 7/8 Inch
    Connector Type Spade/Banana or Custom
    Material Treatment Triple (3x) Cryomag©

    Read moreDone
  • Purist Audio Design Poseidon

    Purist Audio Design Poseidon

    Poseidon Speaker cables

    Purist Audio Design is proud to introduce the first fluid-shielded cable in the Luminist Revision, the Poseidon! We carefully chose the core conductors for this line after countless hours of listening to determine what would work best with the fluid to deliver the sound audiophiles are looking for.

    The Poseidon gives a very warm sound with a sweet top end, a detailed mid range, and a rounded controlled bottom end. It brings the music more forward. Sit back close your eyes and let the music sweep you away!

    Cable Specifications
    Conductors PCCC
    Metals Cu
    Dielectric Material F.E.P.
    Gauge (effective) 10 AWG
    Dampening Material Fluid
    Current Capacity (DC) 55
    Resistance 0.000999Ω/FT
    Estimated Break-In Time 300 Hours
    Cable Diameter (Speaker) 3/4 Inch
    Cable Diameter (Bi-Wire) 7/8 Inch
    Connector Type Spade/Banana or Custom
    Material Treatment Triple (3x) Cryomag©

    Read moreDone
  • Purist Audio Design Venustas

    Purist Audio Design Venustas

    Venustas Speaker Cables

    The audiophile aims for the highest quality and best sound possible. We offer the Venustas Speaker line in two different configurations, with customization available upon request:
    • Standard Speaker
    • Bi-Wire Speaker
    These speaker cables come in a two (2) cable set.

    The Venustas Speaker Cables come standard with:

    • Purist’s newly designed spade or banana.

    Cable Specifications
    Conductors Alloy
    Metals Ag/Cu/Au
    Dielectric Material F.E.P.
    Gauge (effective) 8 AWG
    Dampening Material Ferox
    Current Capacity (DC) 73
    Resistance 0.000628Ω/FT
    Estimated Break-In Time 300 Hours
    Cable Diameter (Speaker) 3/4 Inch
    Cable Diameter (Bi-Wire) 7/8 Inch
    Connector Type Spade/Banana or Custom
    Material Treatment Triple (3x) Cryomag©

    Read moreDone
  • Purist Audio Design Vesta

    Purist Audio Design Vesta

    Vesta Speaker Cables

    For years, Purist Audio Design has been asked by customers for a inexpensive speaker cable that could be used for home audio, professional audio, car audio and internal wiring projects. Audiophiles, your wait is over. We are proud to introduce the Luminist Revision Vesta.

    The Vesta uses our newly designed Spade and Banana! These are our best connectors yet! They are crafted from beryllium copper with silver plating and then a final gold plating. Additional Spade or Banana tips can be purchased through your dealer.

    Vesta is a two conductor, one hundred percent foil shielded speaker cable, built to give the audiophile the quality and sound performance you have come to except over the years from Purist Audio Design.

    Cable Specifications
    Conductors OFC
    Metals Cu
    Dielectric Material P.P.
    Gauge (effective) 12 AWG
    Dampening Material N/A
    Resistance 0.001588Ω/FT
    Estimated Break-In Time 150 Hours
    Cable Diameter 1/2 Inch
    Connector Type Spade/Banana or Custom
    Material Treatment Triple (3x) Cryomag©

    Read moreDone
  • Quested AP1550-2 Amplifier

    Quested AP1550-2 Amplifier

    Quested AP1550-2 Amplifier

    The 1550W per channel at 4Ω Quested AP1550-2 Channel Class A/B Amplifier is a 2RU 19″ rackmountable amplifier designed for powering passive monitors in recording studios and film production facilities. The amplifier is rated for 1550W per channel at 4Ω and 775W per channel at 8Ω. For I/O, the amplifier features balanced 3-pin XLRs input connectors with advanced sidechain limiting, balanced 3-pin XLR link output connectors for routing the signal to additional amplifiers, and 4-pole Speakon outputs for connecting to studio monitors.

    The AP1550-2 is Quested’s most powerful stereo amplifier deigned to handle large passive monitors delivering exceptional sonic performance.

    Rated at 1500W per channel at 4Ω and 775W per channel at 8Ω, this Class A/B Amplifier is a 2RU 19″ rackmountable amplifier designed for powering passive monitors in recording studios and post production facilities.

    Quested AP1550-2 Connections:
    XLR Inputs
    XLR Link Output on Each Channel
    4-Pole Speakon Outputs
    Sidechain Limiting

    TECHNICAL SPECIFICATION

    Output power (Watts RMS) per channel

    8 ohms @ 1 kHz 775
    4 ohms @ 1 kHz 1500
    2 ohms @ 1 kHz 1800
    Mono Bridged

    8 ohms @ 1 kHz 3000
    4 ohms @ 1 kHz 3600
    THD @ rated power

    4 ohms 1 kHz <0.008%
    20Hz-20 kHz <0.03%
    Input CMRR >90dB

    Hum & Noise -105dB

    Gain +32dB

    Sensitivity for rated output, 4 ohms +3.5dBu (1.2V)

    Damping Factor 1 kHz, 8 ohms >400

    Frequency response 20Hz-20kHz +0/-0.5dB

    Input impedance (actively balanced) 20k ohms

    Dimensions (mm) – 2U 88x482x428

    Weight 23.25kgs

    Power requirement 230 VAC @ 8.0 amps max, 115 VAC @ 16.0 amps max

    Read moreDone
  • Quested AP750-2 Amplifier

    Quested AP750-2 Amplifier

    Quested AP750-2 Amplifier

    The 750W per channel at 4Ω Quested AP750-2 Channel Class A/B Amplifier is a 2RU 19″ rack-mountable amplifier designed for powering passive monitors in recording studios and film production facilities. The amplifier is rated for 750W per channel at 4Ω and 450W per channel at 8Ω. For I/O, the amplifier features balanced 3-pin XLRs input connectors with advanced sidechain limiting, balanced 3-pin XLR link output connectors for routing the signal to additional amplifiers, and 4-pole Speakon outputs for connecting to studio monitors.

    The Quested AP750-2 is a high ouput 2-Channel amplifier designed to match the critical requirements of passive studio monitoring.

    It’s the perfect choice to drive the Quested H108 and VH2108 passive monitors.

    Features:
    XLR Inputs
    XLR Link Output on Each Channel
    4-Pole Speakon Outputs
    Sidechain Limiting

    TECHNICAL SPECIFICATION

    Output power (Watts RMS) per channel

    8 ohms @ 1 kHz 300
    4 ohms @ 1 kHz 500
    2 ohms @ 1 kHz 700
    Mono Bridged

    8 ohms @ 1 kHz 1000
    4 ohms @ 1 kHz 1380
    THD @ rated power

    4 ohms 1 kHz <0.008%
    20Hz-20 kHz <0.03%
    Input CMRR >90dB

    Hum & Noise -105dB

    Gain +32dB

    Sensitivity for rated output, 4 ohms +3.5dBu (1.2V)

    Damping Factor 1 kHz, 8 ohms >400

    Frequency response 20Hz-20kHz +0/-0.5dB

    Input impedance (actively balanced) 20k ohms

    Dimensions (mm) – 2U 88x482x428

    Weight 16kgs

    Power requirement 230 VAC @ 8.0 amps max, 115 VAC @ 16.0 amps max

    Read moreDone
  • Quested AP950-2 Amplifier

    Quested AP950-2 Amplifier

    Quested AP950-2 Amplifier

    The 950W per channel at 4Ω Quested AP950-2 Channel Class A/B Amplifier is a 2RU 19″ rackmountable amplifier designed for powering passive monitors in recording studios and film production facilities. The amplifier is rated for 950W per channel at 4Ω and 475W per channel at 8Ω. For I/O, the amplifier features balanced 3-pin XLRs input connectors with advanced sidechain limiting, balanced 3-pin XLR link output connectors for routing the signal to additional amplifiers, and 4-pole Speakon outputs for connecting to studio monitors.

    The Quested AP950-2 is a high quality 2-Channel studio amplifier which delivers exceptional sonic performance and power: 950W at 4 Ohms or 475W per channel at 8 Ohms.

    It’s the perfect choice to drive the passive Quested VH3208 and HQ210 monitors.

    Features
    2 channel class A/B
    2 ru
    XLR Inputs
    XLR Link Output on Each Channel
    4-Pole Speakon Outputs
    Sidechain Limiting

    TECHNICAL SPECIFICATION

    Output power (Watts RMS) per channel

    8 ohms @ 1 kHz 475
    4 ohms @ 1 kHz 950
    2 ohms @ 1 kHz 1550
    Mono Bridged

    8 ohms @ 1 kHz 1900
    4 ohms @ 1 kHz 3100
    THD @ rated power

    4 ohms 1 kHz <0.007%
    20Hz-20 kHz <0.03%
    Input CMRR >90dB

    Hum & Noise -105dB

    Gain +32dB

    Sensitivity for rated output, 4 ohms +3.5dBu (1.2V)

    Damping Factor 1 kHz, 8 ohms >400

    Frequency response 20Hz-20kHz +0/-0.5dB

    Input impedance (actively balanced) 20k ohms

    Dimensions (mm) – 2U 88x482x428

    Weight 20.5kgs

    Power requirement 230 VAC @ 8.0 amps max, 115 VAC @ 16.0 amps max

    Read moreDone
  • Quested CX8 Speaker

    Quested CX8 Speaker

    Quested CX8 Speaker

    QUESTED HIGH POWERED CEILING OVER HEAD SPEAKERS

    When clarity, power and fatigue free sound is required. Quested CX8 passive designed speakers will deliver above your expectations. Small form factor designed speakers that can easily fit into the tightest spaces but delivery a large open sound, Suitable installs: High End Residential Cinemas & Media Rooms, Private Venues, Clubs, Bars, Restaurants, Hotels, Gyms, Offices etc.

    Read moreDone
  • Quested H108 Speakers

    Quested H108 Speakers

    Quested H108 Speakers

    The H108 is the smallest of the Quested passive monitors. Primarily designed to be used in a nearfield or a meter-bridge position. It utilises a single 8” custom LF driver and silk soft dome HF with front firing ports. The hand built crossover network offers a very efficient and transparent passive network. Delivering an exceptional and accurate sound stage along with the ability to produce a high SPL when required, the H108 has become a favourite with the mastering and broadcast community. The H108 is also the monitor that Roger uses at home.

    TECHNICAL SPECIFICATION
    Dimensions: 240(w) x 404(h) x 244(d) mm

    Weight: 12 kg / 25.5 lb

    Drivers: Bass cone – 1 x 200 mm (8 ”)

    High Frequency: Soft dome – 1 x 28 mm (1 ⅛”)

    Maximum SPL: 107 dB continuous pink noise @ 1m Leq 1 minute. 113 dB continuous pink noise per pair @ 1m Leq 1 minute

    Frequency Response: 82 Hz-20 kHz ± 2 dB / 46 Hz-22 kHz -6 dB

    Connector: Single pair binding posts

    Impedance: 8 ohms

    Sensitivity: 90.5 dB @ 1 m

    Power Requirements: Amplifier rated at 8 ohms delivering between 60 and 200W RMS per channel

    Read moreDone
  • Quested HQ210 Speakers

    Quested HQ210 Speakers

    Quested HQ210 Speakers

    The largest of the three way passive monitors is the HQ210. With two 10” LF drivers along with a soft dome mid and a soft dome high mounted in a rotatable baffle, the HQ210 can be used vertically or horizontally. As with all the passive Quested monitors a hand built crossover network is employed that offers a very efficient and transparent performance. Designed to be a midfield main monitor for use as either a soffit or free standing system. The HQ210 is the most powerful passive monitor in the Quested range. Recommended partner amplifier is the Quested AP1550-2.

    TECHNICAL SPECIFICATION
    Dimensions: 590(w) x 850(h) x 355(d) mm

    Weight: 60 kg / 132 lb

    Drivers: Bass cone – 2 x 250 mm (10 ”)

    Mid Frequency soft dome: 1 x 75 mm (3”)

    High Frequency soft dome: 1 x 28 mm (1 ⅛”)

    Maximum SPL: 113.5 dB continuous pink noise @ 1m Leq 1 minute. 119.5 dB continuous pink noise per pair @ 1m Leq 1 minute

    Frequency Response: 40 Hz-20 kHz ± 2 dB / 35 Hz-22 kHz -6 dB

    Connector: Triple pair binding posts

    Impedance: 8 ohms

    Sensitivity: 92dB @ 1 watt 1

    Power Requirements: Amplifier rated at 8 ohms delivering between 300 and 900W RMS per channel

    Read moreDone
  • Quested QSB112 Subwoofer

    Quested QSB112 Subwoofer

    Quested QSB112 Subwoofer

    The QSB112 sub-woofer is the ideal solution for engineers and producers who require an accurate high power reference near to mid filed subwoofer. The custom designed 12” driver features an external radial chassis that provides greater cooling benefits to the voice coil and magnet assembly reducing thermal compression within the driver when operating at higher SPL’s. With a frequency response down to 25Hz the QSB112 is suitable for production work both with music and film in multi-channel systems and is the perfect partner to the VH3208. The recommended amplification option is the SBC800. The SBC800 includes all the tools necessary to align and configure your system with L/C/R and LFE inputs along with adjustable crossover, phase and gain. Two parametric EQ’s. Bypass and solo functions. The output stage of the SBC800 delivers 800W in to 4ohm and can drive up to two QSB112’s

    The Quested QSB112 12″ Passive Subwoofer extends the low frequency response of the monitoring system. It’s the perfect addition to situations where extended or high levels of LF performance are required.

    TECHNICAL SPECIFICATION:

    • Dimensions: 485(w) x 700(h) x 324(d) mm
    • Weight: 39 kg / 86 lb
    • Drivers: Bass cone – 1 x 305 mm (12 ”)
    • Max SPL: 121 dB continuous pink noise @ 1m Leq 1
    minute. 127 dB per pair pink noise @ 1m Leq 1 minute
    • Frequency Response: 29 Hz-200 Hz ± 2 dB &
    25 Hz – 6 dB
    • Impedance 8 ohms
    • Sensitivity 92 dB @ 1W 1m
    • Connector 4 pole Speakon
    • Recommended amplifier SBC800

    Read moreDone